preguntas frecuentes
48v máx a través de 4 baterías en serie. Ese es el máximo. Necesitaría 2 36v en serie para obtener 72v.
Hola, una sola batería tiene esta función, BMS equilibrará el voltaje.
Sí, todos están engarzados y tienen protección de corte por baja temperatura.
Sí, puede conectar 6 piezas en paralelo y no más de 10 piezas, o puede conectar 3 baterías de 200 Ah en paralelo.
Quieres decir que la batería se reduce a 13. 6 cuando no está en un cargador? Estado de reposo 100% cargado, se sentará alrededor de 13. 6 El voltaje de carga es 14. 2-14. 6 Espero que esto ayude.
Carga:
Tensión límite de carga: 14. 6V
Voltaje de desconexión por sobretensión: 15V
Voltaje de reconexión por sobretensión: 14. 2V
Voltaje de carga del ecualizador: 14V
Voltaje de carga flotante:13. 8V
Voltaje de carga de refuerzo: 13. 8V
Voltaje de carga de reconexión de impulso: 13. 2V
Descargando:
Tensión de desconexión por baja tensión: 10. 8V
Voltaje de reconexión de bajo voltaje: 12. 4V
Tensión de advertencia de bajo voltaje: 11. 6V
Tensión de reconexión de advertencia de bajo voltaje: 12V
Tensión límite de descarga: 10. 4V
Voltaje de desconexión por sobredescarga: 10. 4V
Voltaje de reconexión por sobredescarga:11. 6V
Hola, gracias por su pregunta, es para el corte de seguridad por bajas temperaturas.
Protección de corte por baja temperatura (carga) 0 ℃ ± 4 ℃ (32 °F ± 39. 2°F).
Protección de corte por baja temperatura (descarga) -20 ℃ ± 4 ℃ (-4 °F ± 39. 2°F ) ver menos.
Sí, viene con dos 8x1. Pernos hexagonales de 25x16MM.
Hola, todavía no.
Hola, gracias por tu pregunta. Sí, por supuesto, nuestra batería de 100 AH puede manejar 300 amperios por hasta 5 segundos. El corte de baja temperatura de la batería 100AH puede manejar 300 amperios durante hasta 20 segundos.
Lo mismo: todos tienen función de protección de corte por baja temperatura.
La diferencia: 100ah pesa solo 24. 2LB. 100ah Plus pesa 33LB y la corriente real puede llegar a 107ah. 100ah consta de 4 piezas de celdas conectadas en serie, 100ah plus tiene 12 piezas de celdas en el interior, 4 piezas conectadas en serie y 3 piezas en paralelo.
¿40a o 50a o superior?Respuesta:Hola, le sugerimos que utilice 40A, Máximo 100A.
Hola, la batería de ciclo profundo de Vatrer tiene un BMS de 100 A incorporado para protegerla de sobrecargas, sobredescargas, sobrecorrientes y cortocircuitos con una excelente tasa de autodescarga. Con corte de alta temperatura evita la carga a más de 167 °F (75 °C) y protección de corte de baja temperatura cuando se carga y se descarga.
Puede usar este cargador para cargar la batería, pero le recomendamos que elija un cargador de buena calidad. Esto puede prolongar más la duración de la batería.
Sí, puedes usar 44. 1V cargarlos.
sí, es una buena batería, la recomiendo.
La batería puede funcionar a una temperatura de -20 °C a 60 °C, y una temperatura entre 10 °C y 35 °C es ideal para el almacenamiento a largo plazo.
Almacene en un recipiente a prueba de fuego y fuera del alcance de los niños.
Para un producto de mayor duración, es mejor almacenar la batería al 100 % del nivel de carga y recargarla cada tres meses si no se usa durante mucho tiempo.
Células automotrices de grado A LiFePO4, hay parámetros específicos en nuestro manual.
Hemos lanzado una batería de 24V 100ah.
¿Utilizas una batería de ácido de plomo ahora? No se pueden conectar diferentes baterías en serie o en paralelo. Recomendamos usar la batería lifepo4 en su lugar.
Actualmente, todas las versiones disponibles son engarzadas.
Hola, gracias por tu pregunta.
Admite hasta 4 baterías idénticas en serie,Admite hasta 4 baterías idénticas en paralelo.
Admite hasta 4 series y 4 paralelos.
Será necesario cambiar el convertidor de potencia a un convertidor regulado por LifePO4.
¡RTFM! el listado dice: 12V 200AH Low Temp Cutoff Lithium Iron LiFePO4.
Posiblemente, sin embargo, anularía la garantía, dañaría la carcasa.
Tomará alrededor de un mes. Han sido enviados a nuestro almacén en los EE. UU.
Sí, puede colocar tres combinaciones de baterías en serie para alcanzar los 36 V.
Hola, puede reemplazarlo, pero en cuanto al cargador, recomendamos reemplazar el cargador especial LiFePO4. Voltaje de salida CC14. 2-14. 6V
La batería 200Ah plus está integrada en 200A BMS, la descarga continua máxima es de 200 amperios y la energía es de 2560wh.
La batería de 200 Ah está construida en 100 A BMS, la descarga continua máxima es de 100 amperios y la energía es de 1280 Wh.
Hola, 20. 55x9. 44x8. 58 pulgadas/522x240x218 mm, 48. 5 libras/22 kg.
Hola, 2 baterías de 200 Ah integradas en serie de 100 A bms, la potencia alcanzará los 2560 W, puedes usar un inversor de 2400 W, pero el voltaje del inversor necesita 24 V.
Sí, admite hasta 4 baterías idénticas en paralelo.
La diferencia: 100ah pesa solo 24. 2LB. 100ah Plus pesa 33LB y la corriente real puede llegar a 107ah.
100ah consta de 4 piezas de celdas conectadas en serie, 100ah plus tiene 12 piezas de celdas en el interior, 4 piezas conectadas en serie y 3 piezas en paralelo.
Puedes elegir según tus necesidades, además la capacidad de la batería es mayor, pero el peso también es mayor.
No, no supere los 100 amperios y una revisión de esta batería en YouTube la desarmó y encontró conexiones soldadas.
Dijo que ni siquiera sacaría 100 amperios porque corre el riesgo de derretir la soldadura en los conectores dentro de las celdas de la batería tirando más de 100 amperios.
Dijo que personalmente no consumiría más de 50 amperios en función de cómo estaba la batería.
Tengo esta batería y le he quitado 80 amperios sin problemas, pero tengo cuidado después de ver ese video.
La batería 100ah lifepo4 es 12. 95x6. 77x8. 42 pulgadas, 24. 2 libras.
Hola, gracias por tu buena pregunta. Nuestro 12V (12. La batería de 8V) 100Ah no es una batería de arranque para automóvil, no le sugerimos que la use para encender su automóvil.
Está engarzado, no soldado.
Dear customer, the 100ah lifepo4 battery dimensions:12.95*6.77*8.42inch/329*172*214mm, weight:24.2lb/11kg.
48v max via 4 batteries in series. That is the max. You'd need 2 36v in series to get 72v.
Hi, A single battery all has this function ,BMS will balance the voltage.
Yes, All are crimped and low temp cutoff protection.
Yes, you can connect 6pcs in parallel and no more than 10pcs, or you can connect 3 x 200ah battery in parallel.
You mean the battery drops down to 13.6 when not on a charger ?Resting state 100% charged it will sit around 13.6 .Charge voltage is 14.2-14.6 .I hope this helps.
Charging:
Charging limit voltage: 14.6V
Over voltage disconnect voltage: 15V
Over voltage reconnect voltage: 14.2V
Equalizer charging voltage: 14V
Float charging voltage:13.8V
Boost charging voltage : 13.8V
Boost reconnect charging voltage : 13.2V
Discharging:
Low voltage disconnect voltage: 10.8V
Low voltage reconnect voltage: 12.4V
Under voltage warning voltage: 11.6V
Under voltage warning reconnect voltage: 12V
Discharging limit voltage: 10.4V
Over discharge disconnect voltage: 10.4V
Over discharge reconnect voltage:11.6V
Hello,Thanks for your question, it is for safety cutoff for low temperatures.
Low temp cut off protection ( Charge )0℃ ± 4℃ (32°F ± 39.2°F).
Low temp cut off protection ( Discharge )-20℃ ± 4℃(-4°F ± 39.2°F ) see less.
Yes it comes with two 8x1.25x16MM hex bolts.
Hi, not yet.
Hi, thanks for your question. Yes, of course, our 100AH battery can handle 300amps for up to 5 seconds.100AH battery low temp cutoff can handle 300amps for up to 20 seconds.
The same : all have low temperature cut-off protection function.
The difference: 100ah weighs only 24.2LB. 100ah Plus weighs 33LB, and the actual current can reach 107ah.100ah consists of 4pcs cells connected in series,100ah plus has 12pcs cells inside, connected 4pcs in series and 3pcs in parallel.
40a or 50a or higher?Answer:Hi, we suggest you can use 40A, Maximum 100A.
Hello,Vatrer deep cycle battery has built-in 100A BMS to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. With high temp cutting off prevents charging over 167 °F (75°C) and Low temp cutoff protection when charger and discharger.
You can use this charger to charge the battery, but we recommend choosing good quality charger. This can more extend battery life.
Yes, you can use 44.1V charge them.
Not sure all battery has the same warranty, the four I bought comes with a booklet stating 5 years.
If your solar panel supports lithium battery mode, then you can charge the battery.
yes it is a good battery ill recomend it.
The battery can be operated in temperature of -20° C to 60° C, anda temperature between 10°C to 35°C is ideal for long-term storage.
Store in a fireproof container and away from children.
For a longer-lasting product, it is best to store your battery at100% charge level and recharge every three months if not used for a long time.
Dear customer, the 200ah lifepo4 battery dimensions:20.55*9.44*8.58inch/522*240*218mm, weight:48.5lb/22kg.
Automotive A Grade LiFePO4 Cells, there are specific parameters in our manual.
We have launched 24V 100ah battery.
Do you use lead acid battery now? Different batteries can not be connected in series or in parallel, We recommend using lifepo4 battery instead.
All available are crimped version currently.
Hello,Thanks for your question.
Supporting up to 4 identical batteries in series,Supporting up to 4 identical batteries in parallel.
Supporting up to 4 series & 4 parallel.
Hi, the 100ah battery is weight 24.2lb / 22kg, demension:12.95x6.77x8.42inch / 329x172x241mm.
Will need to change the power converter to a LifePO4 regulated converter.
RTFM! the listing says: 12V 200AH Low Temp Cutoff Lithium Iron LiFePO4.
Possibly, however would void warranty, damage the case.
It will take about a month. They has been shipped to our warehouse in the US.
Yes, you can put three battery combinations in series to reach 36V.
Hello, you can replace it, but as for charger, we recommend replacement of LiFePO4 special charger. Output voltage DC14.2-14.6V.
The 200Ah plus battery is built in 200A BMS, the max continuous discharge is 200 amps and energy is 2560wh.
200ah battery is built in 100A BMS, the max continuous discharge is 100 amps and energy is 1280wh.
Hi,20.55x9.44x8.58inch/522x240x218mm, 48.5lbs/22KG.
Hello, 2pcs 200ah batteries built in 100A bms in series, the power will reach 2560w, you can use a 2400w inverter, but the inverter‘ s voltage needs 24V.
Yes, Supporting up to 4 identical batteries in parallel.
The difference: 100ah weighs only 24.2LB. 100ah Plus weighs 33LB, and the actual current can reach 107ah.
100ah consists of 4pcs cells connected in series,100ah plus has 12pcs cells inside, connected 4pcs in series and 3pcs in parallel.
You can choose according to your needs, plus battery capacity is larger, but the weight is also heavier.
No do not go over 100 amps and a review of this battery on you tube took this battery apart and found soldered connections .
He stated he would not even pull a 100 amps because you risk melting the solder on the connectors inside the battery cells pulling over 100 amps.
He stated he would not personally pull more then 50 amps based on how the battery was out together.
I do own this battery and have pulled 80 amps off it without issue but I’m careful after watching that video.
The 100ah lifepo4 battery is 12.95x6.77x8.42inch, 24.2lbs.
Hi, Thanks for your good question. Our 12V (12.8V) 100Ah battery is not a start-up battery for car, we don’t suggest you use it to start your car.
It is crimped, not solder.