Vatrer 12V Group 24 Lithium Battery with 150A BMS
Vatrer 12V 100Ah Group 24 Low Temp Deep Cycle Lithium Battery With Bluetooth
Lighter, higher capacity and power, and supports expandable design for seamless outdoor battery upgrades. $0.1/kWh TCO.
- 1280Wh of Fully Usable Energy: This 12V 100Ah lithium battery delivers 1280Wh of usable capacity, allowing you to access the full stored energy without the limitations common in lead-acid batteries. It supports stable daily power use in RV, marine, and solar systems.
- Standard Group 24 Size for Easy Replacement: The battery follows the Group 24 standard footprint, allowing direct replacement of most Group 24 lead-acid batteries without modifying battery trays or mounting systems.
- Intelligent Low-Temperature Cut-Off: Charging automatically pauses at 32°F and resumes when temperatures recover, while discharging is restricted at -4°F. This protection helps preserve battery health during winter RV travel and cold-climate solar use.
- 5000+ Deep Cycles for Long-Term Use: Built with Grade-A LiFePO4 cells, the battery supports over 5000 deep charge cycles, helping reduce replacement frequency and long-term ownership costs in off-grid and mobile applications.
- Upgraded 150A Smart BMS Protection: The integrated 150A Battery Management System actively protects against overcharge, over-discharge, overcurrent, short circuits, and temperature extremes, ensuring reliable operation under varying loads.
- IP65-Rated Enclosure for Harsh Environments: With an IP65-rated sealed ABS housing, the battery resists moisture, dust, and salt air, making it suitable for marine use, RV undercarriages, and outdoor solar installations.
- Scalable Up to 4P4S System Configuration: The battery supports expansion up to 4P4S, enabling systems to scale to 51.2V and 20.48kWh, making it suitable for growing RV builds, home solar storage, and backup power systems.
- Multiple Charging Method Compatibility: Designed for modern energy systems, the battery supports LiFePO4 AC chargers, solar charging with MPPT controllers, and DC-to-DC charging from generators, offering flexibility across on-grid and off-grid setups.
Estimated delivery between Jul 09 and Jul 14. Order within .
Group 24 Size, 1280Wh Power
The Vatrer Group 24 Lithium Battery gives you 1280Wh of usable energy in a compact G24 case. If you are replacing a lead-acid Group 24 battery, this size helps reduce fitment concerns while giving you the higher usable capacity and steadier voltage of LiFePO4 chemistry. It works well as a Group 24 lithium battery for RV power systems, marine electrical setups, and compact off-grid storage.
Runs Daily Loads Longer
The Vatrer 12V 100Ah lithium battery supports up to 1920W max load power, giving you stronger output for common 12V and inverter-powered devices. You can use approximately 12.8 hours of runtime for a 100W fan, 4.3 hours for a 300W refrigerator, 2.56 hours for a 500W coffee maker, or 1.28 hours for a 1000W microwave. Actual runtime will vary based on inverter efficiency, appliance cycling, temperature, and battery condition.


150A BMS and IP65 Protection
This 12V 100Ah lithium battery combines an upgraded 150A BMS with a reinforced ABS case and IP65-rated sealing. The BMS monitors charging, discharging, current, voltage, and temperature to help protect against overcharge, over-discharge, overcurrent, short circuit, and extreme temperature conditions. The sealed case adds protection against dust, moisture, vibration, and splashing water, making the battery better suited for RV compartments, marine setups, and mobile power systems.


Low-Temp Protection Built In
Cold weather can damage lithium cells if the battery is charged below safe limits. This Vatrer battery automatically stops charging at 32°F and restricts discharging at -4°F to help protect the internal cells. When temperatures return to a safer range, the battery resumes normal operation without requiring manual reset.


Bluetooth Monitoring on Your Phone
The built-in Bluetooth module connects with the Vatrer app, so you can check voltage, temperature, charging status, remaining capacity, and battery health from your phone. This is useful when the battery is installed under a seat, inside a compartment, or in a storage area that is not easy to access. You can also track power usage during long outings, especially when using the battery with 12V appliances or a trolling motor setup.


Lighter Build, Longer Life
At only 23.48 lbs, this Group 24 lithium battery is easier to lift, install, and remove than many comparable lead-acid batteries, especially in tight RV or boat compartments. The Vatrer 12V 100Ah LiFePO4 battery also supports 5000+ deep cycles, giving you a longer service life with far less routine maintenance. You do not need to add water, clean acid residue, or deal with the faster voltage drop common in aging lead-acid batteries.


Charge from Multiple Sources
You can charge this battery with a LiFePO4-compatible AC charger, solar panels through an MPPT charge controller, or a generator-supported DC-to-DC charging setup. This gives you more flexibility when your power source changes between shore power, solar input, and mobile charging. Always use charging equipment designed for LiFePO4 batteries to protect performance and battery life.


Expandable up to 20.48kWh
The battery supports up to 4P4S system expansion, allowing configurations up to 51.2V 20.48kWh. You can start with one battery and expand capacity later as your energy demand grows. This makes it easier to build around a familiar 12V 100Ah LiFePO4 battery platform while keeping future upgrades open.


Save Space, Reduce Wiring
This Group 24 lithium battery helps simplify installation when space is limited. Compared with bulky AGM battery layouts, its compact Group 24 case and 0.28 cubic feet volume can help reduce installation space and wiring complexity by up to 50% in suitable setups. The sealed LiFePO4 design also gives you more placement flexibility than flooded lead-acid batteries, as long as terminal clearance and cable routing are handled properly.


One Battery, More Uses
A single Vatrer battery can support several power needs without forcing you into one fixed setup. It works for RV house power, trolling motors, off-grid cabins, home energy storage, and camping power systems when matched with the correct charger, controller, and load requirements. If you are comparing the best Group 24 lithium battery for flexible use, this model gives you 1280Wh energy, 150A BMS protection, Bluetooth monitoring, and expandable 4P4S system support.


Ready for Your Next Power Setup
If you are replacing an old Group 24 battery or planning a compact lithium system, this Vatrer battery gives you a practical way to upgrade without overcomplicating the setup. Choose the Vatrer 12V Group 24 battery for more stable power output, easier power monitoring, and a lighter weight.


TECH SPECS
FAQs
No. The Vatrer Group 24 Lithium Battery is built for deep-cycle use, such as RV house power, trolling motors, solar storage, and marine electronics, not engine cranking. Use a dedicated starting battery for outboards, trucks, or RV chassis engines that require CCA or MCA ratings, such as the Vatrer 12V 300Ah battery with CCA.
Yes, this Group 24 lithium battery is designed around the Group 24 format, but you should still check tray length, width, height, and terminal clearance before installation. A standard BCI Group 24 battery size is about 10.25 × 6.81 × 8.88 inches, so leave extra room for M8 terminals, cables, and a hold-down strap.
Yes. This 12V 100Ah lithium battery can power 12V trolling motors such as the Minn Kota Endura C2 30/40/55 or Newport NV-Series 55lb when the motor is designed for a single 12V battery. For 24V or 36V trolling motors, use the correct number of matched 12V batteries in series.
A 1000W to 1500W inverter is the practical range for one battery in most RV or off-grid setups. The battery supports up to 1920W max load power through its 150A BMS, but a 2000W inverter can exceed that limit under heavy continuous AC loads after conversion loss.
Yes, only if the RV converter has a LiFePO4 charging profile or outputs 14.2V–14.6V. Older lead-acid-only converters, such as many basic WFCO or Progressive Dynamics units without lithium mode, may undercharge the battery or charge too slowly. A dedicated LiFePO4 charger is the cleaner option.
No. Do not connect this Vatrer battery in the same battery bank with AGM, flooded, gel, or other lead-acid batteries. Different charge voltages and discharge curves can cause imbalance, reduced usable capacity, or BMS protection shutoff.
Store the battery at 50%–80% charge, disconnect all loads, and keep it in a dry place within the battery’s 14°F to 122°F storage temperature range. Check the battery every 3 months if it sits unused, especially in RVs with parasitic draws from alarms, radios, or monitoring devices.
A vented lead-acid battery box is not required because this sealed LiFePO4 battery does not release acid mist during normal use. Use a secure hold-down bracket or strap, protect the terminals, and add a fuse or breaker sized for the load; for high-current inverter setups, place protection close to the positive battery terminal.
Vatrer 12V Lithium Battery Comparison
