Vatrer 24V 300Ah Lithium Deep Cycle Battery With Bluetooth
Vatrer 24V 300Ah Lithium Deep Cycle Battery With Bluetooth
$1,199.99 USD
Unit price per- 7.68kWh Energy Capacity: This 24V 300Ah lithium battery stores 7680Wh of energy, giving RVs, boats, cabins, and backup systems longer runtime between charges.
- 5120W Max Load Power: With up to 5120W max. load power, it supports higher-demand 24V equipment such as RV appliances, marine electronics, lighting, fans, and off-grid loads.
- 200A BMS Protection: The built-in 200A BMS helps protect against over-charge, over-discharge, over-current, short circuit, high temperature, and low temperature cutoff risks.
- Bluetooth App Monitoring: The Vatrer APP lets you check capacity, voltage, current, power, charging status, discharging status, balance status, and protection status from your phone.
- Low-Temp Cut-Off: Charging stops below 32°F, and discharging stops below -4°F to help protect the lithium battery in cold RV storage, marine use, cabins, and backup setups.
- Up to 61.44kWh Expansion: Start with one 7.68kWh battery and expand up to 4P2S with 8 batteries for 51.2V 1200Ah and 61.44kWh of energy storage.
- Flexible Charging Options: Recharge with a 29.2V 60A LiFePO4 charger in about 5 hours, a 1000W solar panel system with MPPT in about 7.68 hours, or a 60A DC to DC charger in about 5 hours.
- 4000+ Deep Cycles: Built for long-term deep cycle use, this battery delivers 5000+ cycles for RV power, trolling motors, solar storage, off-grid cabins, and home backup systems.
Estimated delivery between Jul 14 and Jul 19. Order within .
$1,199.99 USD
Unit price perMore Power, Fewer Stops
The Vatrer 24V 300Ah lithium battery gives you 7680Wh of energy, 5120W max. load power, and a 200A BMS for steady 24V power across RVs, trolling motors, solar storage, cabins, and backup systems. A full charge can run a 1000W air conditioner for about 7.68 hours or a 500W refrigerator for about 15.36 hours, depending on inverter efficiency and real-world power draw.


Built-In 200A BMS Protection
A battery working behind panels, seats, or storage compartments needs protection you do not have to manage by hand. The built-in 200A BMS helps protect this 25.6V 300Ah LiFePO4 battery from over-charge, over-discharge, over-current, short circuit, high temperature, and low temperature cutoff risks, while auto-cell balance helps keep the cells working more evenly over time.


Smarter Cold-Weather Cutoff
Cold weather can damage lithium batteries if charging continues at the wrong temperature. This 24V LiFePO4 battery with Bluetooth includes low-temp cut-off protection, stopping charging below 32°F and stopping discharging below -4°F, which helps protect the battery during seasonal RV storage, marine use, off-grid cabin stays, or backup power setups exposed to changing temperatures.


Run Everyday RV Equipment Longer
This Vatrer 24V 300Ah lithium battery has enough stored energy for longer off-grid use without frequent recharging. It can power a 1000W RV coffee maker for about 7 hours total runtime, a 1200W microwave for around 6 hours, a 150W portable fridge for about 51 hours, or a 50W CPAP machine for more than 150 hours, depending on inverter efficiency and real-world load conditions.


Check Status From Your Phone
You should not have to open a battery compartment just to know what is happening. With the Vatrer APP, this 300Ah LiFePO4 Bluetooth battery lets you check battery capacity, voltage, current, power, charging status, discharging status, balance status, and protection status in real time from your phone.


Expand As Your Power Needs Grow
One battery gives you 7.68kWh, but your system can grow if your energy needs increase later. This 24V 300Ah LiFePO4 battery supports up to 4P2S expansion with 8 batteries, reaching 51.2V 1200Ah and 61.44kWh, with options like a 2S setup for 51.2V 300Ah / 15.36kWh or a 4P setup for 25.6V 1200Ah / 30.72kWh.


Recharge With Flexible Options
You can recharge this 24V 300Ah lithium battery with a 29.2V 60A LiFePO4 charger in about 5 hours, a 1000W solar panel system with MPPT in about 7.68 hours, or a generator paired with a 60A DC to DC charger in about 5 hours.


Fits RV, Marine, Solar, and Backup Setups
This battery works well in systems that need long runtime, stable output, and better visibility into battery status. You can use the Vatrer 24V 300Ah lithium battery for RV power, 24V trolling motors, marine electronics, off-grid cabins, solar storage, and home backup systems where 7680Wh capacity and Bluetooth app monitoring make day-to-day power management easier.


Upgrade to Vatrer 24V 300Ah Power
If your current setup runs out of power too quickly or makes it hard to track remaining battery capacity, the Vatrer 24V 300Ah lithium deep cycle battery gives you longer runtime and real-time Bluetooth monitoring in one system. It works well for RV power, marine setups, solar storage, and backup energy systems that need stable 24V output. Order yours today and build a power setup that stays ready longer between charges.
TECH SPECS
FAQs
Yes, it can replace a 24V lead-acid deep cycle battery bank when your charger, inverter, and solar controller support LiFePO4 settings. This 7680Wh lithium battery gives more usable energy than lead-acid batteries that are often limited to about 50% usable depth of discharge.
Not directly. This is a 25.6V 300Ah LiFePO4 battery, so 12V RV loads such as lights, water pumps, fans, and control boards need a 24V-to-12V DC converter, or you should use a 12V lithium battery instead.
No, this battery is built for deep cycle power, not engine cranking. Use a separate marine starting battery for the outboard, then use the Vatrer 24V 300Ah lithium battery for a 24V trolling motor, fish finder setup, or onboard electronics with the right voltage equipment.
Use a 24V pure sine wave inverter that stays within the battery’s 5120W max. load power and 200A BMS limit. A 3000W inverter draws about 125A at 24V before efficiency loss, while higher loads need heavier wiring and properly matched protection.
Use a DC-rated fuse or circuit breaker on the positive cable close to the battery. For high-load 24V systems near 200A, many builds use heavy cable such as 2/0 AWG for short runs, but the final fuse and cable size should match your inverter draw, cable length, and installation layout.
Do not mix this 300Ah LiFePO4 Bluetooth battery with lead-acid batteries, older lithium batteries, different capacities, or different brands in the same bank. For series or parallel expansion, use the same Vatrer 24V 300Ah model, matched voltage, and matched state of charge.
The battery uses an IP65-rated enclosure, which helps protect against dust and low-pressure water spray. It can handle outdoor RV, marine, and off-grid installations better than non-sealed batteries, but it should not sit in standing water or be exposed to heavy direct spray for long periods.
Store the battery in a dry place with the power disconnected from loads. For longer storage, keep the battery around 50%-80% state of charge and check it every 3-6 months so your 24V 300Ah LiFePO4 battery is ready for the next RV trip, fishing day, or backup power use.
