Vatrer 12V 560Ah LiFePO4 Battery for Full-Time RV Living and Off-Grid Runtime
Vatrer 12V 560Ah LiFePO4 Battery for Full-Time RV Living and Off-Grid Runtime
- More Energy Between Recharges: The Vatrer 12V 560Ah LiFePO4 battery delivers 7168Wh of stored energy, giving full-time RV and extended off-grid users longer operating time before the next recharge.
- Built for High-Demand RV Power: A built-in 300A BMS supports demanding inverter loads while managing charging, discharging, and key electrical protections. It is well suited to RV systems running higher-power appliances.
- Cold Weather Does Not End Your Charging Season: Automatic self-heating activates from charging input when the battery is too cold to charge safely. The system warms the cells first, then transitions to normal charging automatically.
- Get 560Ah Without Building a Multi-Battery Bank: One 560Ah LiFePO4 battery provides the capacity many RV systems would otherwise reach by combining several smaller batteries, reducing wiring, terminals, and inter-battery connections.
- Know Your Battery Status from Your Phone: This Bluetooth lithium battery gives you direct access to SOC and operating data through the Vatrer app, making day-to-day energy management faster and more precise.
- Recharge with the Power Sources You Already Use: Charge from a LiFePO4 charger, solar system, or generator-based setup, giving RV and off-grid users practical flexibility across campground, boondocking, and backup-power environments.
- Expand When Your Power System Grows: The battery supports flexible series and parallel configurations, including up to 4S4P, so your system can scale beyond a single battery as future energy demands increase.
- Built for Years of Repeated Use: Rated for 5000+ cycles, the Vatrer 12V 560Ah lithium battery is designed for frequent cycling in RV, solar storage, and off-grid systems where long service life matters.
Estimated delivery between Oct 04 and Oct 09. Order within .
Stay Off-Grid Longer Between Recharges
Full-time RV living and long boondocking stays can keep your refrigerator, lights, internet setup, laptops, TV, and other daily loads running for hours at a time. This Vatrer 12V 560Ah LiFePO4 battery stores 7168Wh in a single battery, giving you more usable energy between charging stops without building the same capacity from several smaller batteries.


High-Draw RV Appliances Get the Current They Need
A microwave, coffee maker, or other high-draw appliance can place a heavy demand on your inverter and battery at once. The built-in 300A BMS supports up to 3840W of continuous load power, giving this 300A BMS LiFePO4 battery the current capability needed for demanding RV electrical systems. The BMS also protects the battery against overcurrent, short circuit, and temperature extremes.


Cold Mornings Do Not Have to Stop Charging
After a freezing night, your charging source may be ready before the battery cells are warm enough to accept a charge. When charging input is connected and battery temperature is below 32°F, incoming power is directed to the internal heating system. Once the temperature rises above 41°F, heating stops and normal charging begins automatically.


Recharge Around the Way You Travel
At a campground, the recommended 14.6V 70A LiFePO4 charger can recharge the battery in about eight hours. Away from hookups, solar with an MPPT controller gives you a daytime charging option, while a generator paired with a DC-to-DC charger keeps energy available when sunlight is limited. Your Vatrer 12V 560Ah lithium battery can fit into the charging routine you already use for RV and off-grid travel.


Battery Status at a Glance from Your Phone
Several days into a trip, an accurate SOC reading makes it easier to decide when to recharge. This Bluetooth lithium battery connects to the Vatrer app so you can view SOC and real-time battery operating data from your phone. The app also lets you manage discharge and battery-off functions without repeatedly accessing the battery compartment.


One 560Ah Battery Simplifies a High-Capacity Setup
Building 560Ah from several smaller batteries adds more terminals, interconnect cables, and battery-to-battery connections. A single 560Ah LiFePO4 battery reduces those connection points while providing the capacity needed for larger RV and off-grid systems. Horizontal or vertical placement also gives you more flexibility when arranging the battery inside an equipment or storage compartment.




Room to Expand Beyond a Single Battery
Your system can grow when future energy demands increase. The Vatrer 12V 560Ah LiFePO4 battery supports up to 4S4P when series and parallel connections are combined. For a parallel-only 12V battery bank, up to 10 batteries can be connected, giving larger RV, solar storage, and backup power systems a clear expansion path.


5000+ Cycles for Long-Term Daily Use
Full-time RV and solar storage systems can put a battery through frequent charge and discharge cycles throughout the year. With a rated cycle life of 5000+ cycles, the Vatrer 560Ah LiFePO4 battery is built for repeated use over the long term, helping reduce the need for frequent battery replacement in systems you rely on regularly.


Ready for Longer Off-Grid Stays
Vatrer combines a large-capacity battery design with practical monitoring, cold-weather charging support, and customer service for RV and off-grid users who depend on their electrical system beyond occasional weekend trips. Order your Vatrer 560Ah LiFePO4 battery today and head into your next trip with more energy available between recharges.


Tech Specs
FAQs
Our 560Ah LiFePO4 battery stores 7168Wh, so a simple way to estimate runtime is to divide 7168Wh by your average load in watts. A 500W average load is roughly 14 hours of theoretical runtime, while lighter overnight loads can run much longer. Actual runtime will be lower once inverter conversion losses and changing appliance loads are included, so calculating from your typical daily watt-hour use gives the most useful estimate.
Yes. The built-in 300A BMS supports up to 3840W of continuous load power, making this 300A BMS LiFePO4 battery suitable for a 3000W-class inverter system. When several high-draw appliances are used together, manage the combined load so continuous battery demand stays within the battery's output limit.
When a charging source is connected at a battery temperature of 32°F or below, our self-heating system directs the incoming charging power to the internal heater first. Once the battery warms above 41°F, heating stops and charging begins automatically. In cold-weather RV use, keep your solar, shore-power charger, or other charging source connected so the battery can warm itself before accepting charge.
Yes. A single Vatrer 12V 560Ah lithium battery can replace a multi-battery 12V lead-acid house bank when you want more usable energy with fewer battery-to-battery connections. Use a LiFePO4-compatible charging profile in the RV so the new battery receives the correct charging voltage rather than continuing to use a lead-acid charging routine.
Use a converter or charger that supports a LiFePO4 charging profile. Our 12V 560Ah battery is designed around a 14.2V–14.6V charging range, so a lithium-mode converter can charge it more completely and efficiently than a conventional lead-acid charging profile. If the existing RV converter does not provide a LiFePO4 mode, a compatible lithium charger is the straightforward upgrade.
A battery this large benefits from a substantial solar array rather than a small maintenance panel. Around 1000W or more of solar paired with an MPPT controller provides a practical setup for recovering significant daily energy during off-grid stays. Size the array around how much energy you use each day rather than assuming the full 560Ah capacity must be recharged every morning.
Yes. The battery supports up to 10 batteries in a parallel-only 12V bank, allowing capacity to reach 5600Ah. When adding batteries, bring them to a similar voltage and state of charge before connection and use balanced, equal-length battery cables so current is shared more evenly across the bank.
They apply to two different system layouts. If series and parallel connections are combined, our 12V 560Ah LiFePO4 battery supports up to 4S4P; if the system remains 12V and uses parallel connections only, it supports up to 10P. Use 4S configurations when higher system voltage is needed and 10P when the goal is maximum capacity at 12V.
Yes. The battery supports horizontal and vertical placement, giving you more flexibility in RV battery compartments and custom off-grid installations. Because a single 560Ah battery represents a large amount of stored energy in one enclosure, secure it firmly in mobile installations so road vibration and vehicle movement do not allow the battery to shift.
Yes. Our Bluetooth lithium battery connects to the Vatrer app so you can view SOC and operating information without accessing the battery compartment. You can also control discharge and battery-off functions from the app, which is useful when putting an RV into storage, isolating house loads, or checking battery status before a trip.
